PLANET Industrial 8-Port 802.3af PoE + 2-Port SFP Managed Switch
PLANET Industrial 8-Port 802.3af PoE + 2-Port SFP Managed Switch

PLANET IP30 Industrial 8-Port 10/100/1000 Base- TX 802.3af PoE + 2-Port 100/1000FX

IGS-10020PT
*** Out of stock ATM, Available On Backorder ***
$715.00
Tax included

IGS-10020PT

The IGS-10020PT from PLANET Technology is a managed, industrial networking switch equipped with a rugged IP30 metal case for stable operation in heavy, demanding environments. This device provides high protection against electromagnetic interference and surges. This switch features (8) Gigabit Ethernet RJ45 ports with 802.3at PoE+ injectors, (2) SFP ports with auto detection and an RJ45 console interface for basic management and setup.

Features:

  • IEEE 802.3at/af Power over Ethernet/ End-Span PSE
  • PoE Schedule Power Recycling /PD Alive Check
  • Supports Modbus TCP/IP protocol for factory automation
  •  48V DC redundat power input design, 2 DI AND 2 DO
  • IEEE 802.1Q VLAN/Private VLAN/Q-in-Q/protocol-based VLAN/MAC-based VLAN
  • ~40~75 degrees C operating temeprature

Note: Power supply is not included, please select from the checklist below.

Quantity Unit price You Save
4 $693.55 $85.80
 

IGS-10020PT - PLANET Industrial 8-Port 802.3af PoE + 2-Port SFP Managed Switch

Layer 3 Features

  • Max 8 VLAN interfaces
  • Max 32 routing entries
  • IPv4 & IPv6 software static routing

Environment

  • Operating Temperature: -40 ~ 75C
  • Storage Temperature: -40 ~ 85C
  • Humidity: 5 ~ 95% non-condensing

Specifications

  • Power Requirements: DC 48V ~ 56V
  • Power Consumption: Full load max 255W
  • Dimensions: 72 x 107 x 152mm
  • Weight: 1032g

Hardware Specifications
Version 4
Copper Ports 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots 2 100/1000/2500BASE-X mini-GBIC SFP ports (Port 9 and Port 10)
Console 1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
Reset Button < 5 sec: System reboot
> 5 sec: Factory default
Enclosure IP30 aluminum case
Installation DIN-rail kit and wall-mount kit
Connector Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
Removable 6-pin terminal block for DI/DO interface
Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND
Alarm One relay output for power failure. Alarm Relay current carry ability: 1A @ DC 24V
DI/DO 2 Digital Input (DI): Level 0: -24V~2.1V (±0.1V)
Level 1: 2.1V~24V (±0.1V)
Input Load to 24V DC, 10mA max.
2 Digital Output (DO): Open collector to 24V DC, 100mA max.
Dimensions (W x D x H) 76.8 x 107.3x 152 mm
Weight 1119g
Power Requirements 48-54V
Power Consumption 257 watts/876BTU (Full loading with PoE function)
ESD Protection 6KV DC
EFT Protection 6KV DC
LED Indicator System:
 Power 1 (Green)
 Power 2 (Green)
 Fault Alarm (Red)
 Ring (Green)
 R.O. (Ring Owner) (Green)
 DIDO (Red)
Per 10/100/1000T RJ45 Ports:
 PoE-in-Use (Amber)
 LNK/ACT (Green)
Per 100/1000/2500BASE-X SFP Interface:
 1G/2.5G (Green)
 100 (Amber)
4 x LED for PoE Usage:
 60W, 120W, 180W and 240W (Amber)
Switching Specifications
Switch Architecture Store-and-Forward
Switch Fabric 26Gbps/non-blocking
Throughput (packet per second) 19.34Mpps@ 64Bytes packet
Address Table 8K entries, automatic source address learning and aging
Shared Data Buffer 4Mbits
Flow Control IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame 9Kbytes
Power Over Ethernet
PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type End-span
PoE Power Output Per port 54V DC, 350mA; max. 15.4 watts (IEEE 802.3af)
Per port 54V DC, 590mA; max. 36 watts (IEEE 802.3at)
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget 240W maximum (depending on power input)
Max. Number of Class 2 PDs @ 7 watts 8
Max. Number of Class 3 PDs @ 15.4 watts 8
Max. Number of Class 4 PDs @ 30.8 watts 8
PoE Extend Mode Remote power feeding up to 100m in standard mode and 200m in extend mode
Layer 2 Function
Port Configuration Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Port Status Display each port’s speed duplex mode, link status, flow control status,
auto negotiation status, trunk status
Port Mirroring TX/RX/both
1 to 1 monitor
VLAN 802.1Q tagged based VLAN, up to 255 VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
GVRP
MVR (Multicast VLAN Registration)
Up to 4K VLAN groups, out of 4094 VLAN IDs
Link Aggregation IEEE 802.3ad LACP/static trunk
Supports 5 trunk groups with 10 ports per trunk group
QoS Traffic classification based, strict priority and WRR
8-level priority for switching
 Port number
 802.1p priority
 802.1Q VLAN tag
 DSCP/TOS field in IP packet
IGMP Snooping IGMP (v1/v2/V3) snooping, up to 255 multicast groups
IGMP querier mode support
MLD Snooping MLD (v1/v2) snooping, up to 255 multicast groups
MLD querier mode support
Access Control List IP-based ACL/MAC-based ACL
Up to 123 entries
Bandwidth Control Per port bandwidth control
 Ingress: 500Kb~1000Mbps
 Egress: 500Kb~1000Mbps
Storm Control Unicast/Multicast/Broadcast
Layer 3 Function
IP Interfaces Max. 8 VLAN interfaces
Routing Table Max. 32 routing entries
Routing Protocols IPv4 software static routing
IPv6 software static routing
Management
Basic Management Interfaces Console; Telnet; Web browser; SNMP v1, v2c
Secure Management Interfaces SSHv2,TLSv1.2, SNMP v3
ONVIF ONVIF device discovery
ONVIF device monitoring
Floor Map
SNMP MIBs RFC-1213 MIB-II
IF-MIB
RFC-1493 Bridge MIB
RFC-1643 Ethernet MIB
RFC-2863 Interface MIB
RFC-2665 Ether-Like MIB
RFC-2819 RMON MIB (Group 1, 2, 3 and 9)
RFC-2737 Entity MIB
RFC-2618 RADIUS Client MIB
RFC-2933 IGMP-STD-MIB
RFC 3411 SNMP-Frameworks-MIB
IEEE 802.1X PAE
LLDP
MAU-MIB
Power over Ethernet MIB
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Stability Testing IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Standards Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3z Gigabit SX/LX
IEEE 802.3bz 2.5GBASE-X
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy-Efficient Ethernet
IEEE 802.3ah OAM
IEEE 802.1ag Connectivity Fault Management(CFM)
IEEE 1588 PTPv2
RFC 768 UDP
RFC 783 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
ITU-T G.8032 ERPS Ring
ITU-T Y.1731 Performance Monitoring
Environment
Operating Temperature -40 ~ 75 degrees C
Storage Temperature -40 ~ 85 degrees C
Humidity 5 ~ 95% (non-condensing)
Device Type
Network Switch
Power Over Ethernet
Device Features
Industrial
POE Ports
8
SFP Ports
2 Ports
Power Input
DC
SFP
Yes, 1G SFP
Installation Type
DIN-rail
Wall-mount
Ports
8 10/100/1000TX + 2 1000X SFP
Type
Managed
PoE Standard
802.3at
Operating Temperature
-40 to 75° C
Supports
IEEE 1588v2 Transparency, ERPS Ring, DIDO
Console
yes
Max. Watts per port
36
4711213689550
IGS-10020PT

Related Products & Accessories

Product added to wishlist
Product added to compare.

We use cookies to ensure that we give you the best experience on our website,

if you continue to use this site we will assume that you are happy with it.