DINrail PRO is a mounting bracket for LtAP mini series products, designed to fit standard35 mm × 7.5 mm DIN rails. This bracket will allow to install LtAP mini next to the industrial control equipment like water meters etc., as well as in equipment racks. Mounting bracket is made from metal and comes with a metal ring.
Toolless Quick-Mounts for Ubiquiti CPE Products.
Designed for additional mounting flexibility and device alignment options, the Quick-Mount accessory kit features an easy-to-use, toolless design.Features:
No tools required
Quick and easy installation
Supports NanoStation, NanoStation Loco, and NanoBeam devices
UNSLK25 Loco M2 M5 Kit
Fits the following Ubiquiti radios: LocoM2 - NanoStation Loco M2 LocoM5 - NanoStation Loco M5Reduce unwanted RF energy from the back, sides, top, and bottom outside the designed beam from reaching the antenna and radio keeping the radio focused on the intended signal.Co-locate several radios close together without...
The quickMOUNT pro is an advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment.The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the...
Ubiquiti UniFi Switch Flex Utility
The USW Flex Utility is an outdoor weatherproof enclosure designed for use with the UniFi Switch Flex, USW-Flex. It includes an Ethernet patch cable and a 60W PoE adapter, which provides a maximum PoE budget of 46W. The USW Flex Utility can be easily mounted on a pole, provides clean cable management and screw lock for...
Sturdy and affordable outdoor enclosure for GPeR units. It can be easily mounted on walls and poles. Despite the name, meticulous testing revealed that in real life the enclosure has an IP68 rating with protection from immersion in water, as well as protection from dust. Get an outdoor enclosure for the GPeR to safely extend Ethernet...
High Density Chassis for Multiple Converter Installation PLANET MC-700 provides 7 slots in the 10” rack which saves more spaces for fiber-optic wiring yet eases the maintenance of media conversion. It allows the connectivity of up to seven PLANET Ethernet, Fast Ethernet, Gigabit Ethernet or VDSL2 Converters in one chassis. One fan is...
CA433U case for RB433 series and RBM33G
Indoor case (3 holes for Nfemale Bulkhead connectors or Swivel antennas and hole for USB). This new revision is slightly higher, to fit more miniPCI card models. Ships with different faceplate stickers, to match used ports. Fits RB433 series products and RBM33G
ICC-BRACKET-LCThe ICC-BRACKET-LC from IgniteNet is a long range bracket precision tool designed to give ultimate accuracy and stability to maximise the distance of MetroLinq wireless radios. With the offset design, you can maximise the number of units on your tower. Accuracy paired with a rugged design allows for deployment in even the harshest of...
PBE-RAD-400The PBE-RAD-400 from Ubiquiti is a 400mm radome that fits the following wireless dish models: PBE-M2-400, PBE-M5-400, NBE-M5-400. This product is a radome only and does not include PowerBeam or NanoBeam. This radome greatly reduces wind load, protects the antenna surface and helps conceal equipment from public view.
CKG2-RMThe CKG2-RM from Ubiquiti Networks is a rackmount kit for UniFi Cloud Key Gen 2 and Gen 2 Plus devices to fit into a 19" wide rack. This device comes with (4) pairs of cage nuts and M6 bolts, and has a front panel Ethernet port to allow for a simple installation.
The LHGmount from MikroTik is a basic pole mount adapter for LHG series products. The LHGmount is made from metal and supports all Light Head Grid LHG series products including LHG XL. The package also includes (1) U-bolt and (1) K-58 mounting kit.
USKT5 Titanium Sector Kit 5 GHz
The USKT5 shielding is designed for Ubnt antenna AM-V5G-Ti
This kit will further reduce unwanted RF energy from the back, sides, top and bottom outside the desired beam width from reaching the antenna and radio keeping the radio focused on signals only from desired coverage area.
UNBK25 Shielding designed for the Ubiquiti5 GHz 40cm NanoBeam 400 versions,
Features of UNBK25:
Lower noise floor
Superior signal to noise ratio
Less wireless retries and errors
Higher sustainable air rates
Up to 50% increase in performance
Reduce unwanted RF energy from the back, sides, top, and bottom outside the designed...
StationBox 2.4Ghz MMCX connector 14dbi antenna
The StationBox is our most affordable weatherproof CPE solution for MikroTik and Ubiquiti RouterStations. It is designed to work with most MikroTik RouterBoard RB/411-series (except for RB/411U) and MikroTik R52 radios as well as Ubiquiti RouterStation and RouterStationPro and Ubiquiti radios. The StationBox...
SBX-XL519: StationBox XL with 19dBi 5GHz antenna
Made For MikroTik - suits all kinds of Routerbaords: RB911, 711, 411 and even RB433 !
StationBox XL is outdoor enclosure with built-in high gain dual polarization antenna. It is designed for easy integration with MikroTik RouterBoards and deployment as mid range CPE or short distance PtP connection.