UA-Intercom  – Buy Ubiquiti UniFi Access Intercom | WISP Australia
UA-Intercom  – Buy Ubiquiti UniFi Access Intercom | WISP Australia

Ubiquiti UniFi UA-Intercom Access Intercom NFC UniFi Identity mobile app PIN code QR code

UA-Intercom
In Stock
$588.00
Tax included

UA-Intercom

Indoor/outdoor intercom terminal for managing residential and commercial building entry requests.

  • Unlock using an NFC card, UniFi Identity mobile app, PIN code or QR code
  • Directory and doorbell to request entry
  • Pairs with multiple UniFi Intercom Viewers for remote access control
  • Connects to UniFi Access Hub series using PoE
  • Weatherproof (outdoor exposed -30 to 60° C)

 

UA-Intercom - Ubiquiti UniFi Access Intercom NFC UniFi Identity mobile app PIN code QR code

Mechanical
Dimensions 324.8 x 113.7 x 28.3 mm (12.8 x 4.5 x 1.1")
Weight Device: 965 g (2.1 lb)
Bracket: 445 g (1 lb)
Enclosure material Aluminum alloy, UV-stabilized polycarbonate, glass
Mount material Powder-coated stainless steel
Mounting Wall mount, adapter to the gooseneck pedestal (Included)
Surface angle mount, flush mount (Optional)
Sunshield kit (Optional)
Weatherproofing IP65
Hardware
Networking interface (1) GbE RJ45 port
Connectivity Bluetooth 4.2
NFC
Power method PoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
Supported voltage range 48V DC
Max. power consumption 13W
ESD/EMP protection Air: ±15kV, contact: ±8kV
Sensors Proximity sensor
ALS sensor
Camera 3264 x 2448, 8 MP
H: 79.4°, V: 97.5°, D: 118.2°
Display 177 mm (7") diagonal
Resolution 1024 x 600 (16:9)
Display luminance Max. 1000 nits (typical)
Touch screen technology Capacitive multi-touch
Microphone Yes
Speaker (1) 4 ohm, 2W
LEDs (1) LCM low temperature indicator: orange (LCM turned off when it’s below -25° C but the system funtions normally)
(1) LED floodlight
(13) Keypad LED backlight
Button (1) Factory-reset
NFC frequency 13.56 MHz
NFC read range < 30 mm
NFC standards ISO 14443A, 14443B, 15693
NFC technology NFC Tag 1,2,3,4,5
MIFARE Classic
MIFARE Plus
MIFARE Ultralight
MIFARE DESFire
Ambient operating temperature Device: -30 to 60° C (-22 to 140° F)
Display:* -25 to 60° C (-13 to 140° F)
*The display will turn off when the ambient temperature is above/below the display operation temperature, but other functions will remain functional. (Effective after firmware v 1.0.66)
Operating environment Outdoor use
Ambient operating humidity 5 to 90% noncondensing
Software information The software version of a product can be checked at https://unifi.ui.com
UL 294 level Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
CAN/ULC-60839-11-1 Grade Grade assignment: I
Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level UA-Intercom, V01
Software
Management application UniFi Access: Version 1.22.17 and later

Ethernet Ports
1 Port 10/100/1000
Bluetooth
4.0+LE
0810084693841
UA-Intercom
No reviews

Related Products & Accessories

Comments (0)
No customer reviews for the moment.
Product added to wishlist
Product added to compare.

We use cookies to ensure that we give you the best experience on our website,

if you continue to use this site we will assume that you are happy with it.