Mikrotik Accessories

SMASMA0.5 | Buy 0.5m SMA male to SMA male cable | WISP Australia
In Stock
Accessories

0.5m SMA male to SMA male cable

MikroTik
SMASMA0.5
$10.00
SMASMA0.5 0.5m SMA male to SMA male cable, that can be used to connect your LTE card (with ACSMAUFL pigtail) to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these cables). 50 Ohm impedance.
SMASMA | Buy 1m SMA male to SMA male cable | WISP Australia
In Stock
Accessories

1m SMA male to SMA male cable

MikroTik
SMASMA
$19.36
SMASMA 1m SMA male to SMA male cable, that can be used to connect your LTE card (with ACSMAUFL pigtail) to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these cables). 50 Ohm impedance.
MikroTik AC DC Power Adapter 48V 120W
In Stock
Power Management

MikroTik AC DC Power Adapter 48V 120W

MikroTik
48V25A120W
$67.06
48V25A120W Input: 100 ~ 240V , 50~60Hz Output: DC 48V 2.5A / 2500mA 120W Power Adapter with LED indicator Power Cable Included
MikroTik GESP+POE-IN passive PoE injector with surge protection
In Stock
$22.04
GESP+POE-IN You can’t buy safety, but you can buy MikroTik devices to keep your setup safe. Take a look at the GESP product line. It consists of a new revision of the classic MikroTik GESP surge protector and a brand new device – the GESP+POE-IN, a passive PoE injector with surge protection. Together these two devices offer maximum security and peace of...
MikroTik GESP Gigabit Ethernet Surge Protector IP67 enclosure
*** Out of stock ATM, Available On Backorder ***
GESP GESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lightning or surge damages.Here’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protectors on each end. They come sealed inside a new and improved IP67 weatherproof enclosure. Your...
MikroTik TG-BT5-IN Indoor Bluetooth tags for IoT asset-tracking/telemetry setups
In Stock
TG-BT5-IN: slim and sleek, perfect for indoor inventory tracking Bluetooth tags play a huge role in IoT setups, where Bluetooth is used to broadcast the data over short distances. You can use these small devices for proximity-based tracking of various objects. For example, if you have a KNOT gateway in different parts of a construction site, you can use...
MikroTik XQ+BC0003-XS+ 100G QSFP28 to 4xSFP28 break-out cable
In Stock
Gigabit Networking

MikroTik XQ+BC0003-XS+ 100G QSFP28 to 4xSFP28 break-out cable

MikroTik
XQ+BC0003-XS+
$137.50
XQ+BC0003-XS+ XQ+BC0003-XS+ is a QSFP28 to 4x SFP28 break-out cable. This addition to the MikroTik 100 Gigabit product line allows you to connect multiple 25 Gigabit devices to your CRS504 or CCR2216. With the integrated SFP28 modules, connecting numerous devices becomes as simple as it gets. The cable is 3 meters long – the perfect length to reach all...
MikroTik XQ+DA0003 100Gbps QSFP28 direct attach Cable 3m
Last items in stock
$99.06
XQ+DA0003 Connect any two MikroTik 100 Gigabit heroes (CCR2216 & CRS504) without a hassle - this cable has integrated QSFP28 modules. Just plug it in and enjoy the speed! The cable is 3 meters long – the perfect length to reach all the necessary spots while keeping your server room neat and tidy. It is fairly flexible – you can keep your devices...
MikroTik XQ+DA0001 100Gbps QSFP28 direct attach Cable 1m
In Stock
$60.50
XQ+DA0001 Connect any two MikroTik 100 Gigabit heroes (CCR2216 & CRS504) without a hassle - this cable has integrated QSFP28 modules. Just plug it in and enjoy the speed! The cable is one meter long, which should be enough for most setups, but there is also a 3-meter version available. It is fairly flexible – you can keep your devices apart or on top...
MikroTik RouterBOARD Aluminium Indoor Case for RBM33G & RB433 series
In Stock
$37.46
CA433U case for RB433 series and RBM33G Indoor case (3 holes for Nfemale Bulkhead connectors or Swivel antennas and hole for USB). This new revision is slightly higher, to fit more miniPCI card models. Ships with different faceplate stickers, to match used ports. Fits RB433 series products and RBM33G
GPeR IP67 Case
Last items in stock
Cases, Mounts & Shields

GPeR IP67 Case

MikroTik
GPeR-IP67-Case
$11.06
GPeR-IP67-Case Sturdy and affordable outdoor enclosure for GPeR units. It can be easily mounted on walls and poles. Despite the name, meticulous testing revealed that in real life the enclosure has an IP68 rating with protection from immersion in water, as well as protection from dust. Get an outdoor enclosure for the GPeR to safely extend Ethernet...
MikroTik quickMOUNT PRO
In Stock
Cases, Mounts & Shields

MikroTik quickMOUNT PRO

MikroTik
QMP
$16.00
QMP The quickMOUNT pro is an advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment.The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the...
Q+BC0003-S+ MikroTik 40 Gbps QSFP+ brake-Out cable to 4x10G SFP+
In Stock
$98.05
Q+BC0003-S+ Q+BC0003-S+ it's 40 Gbps QSFP+ brake-Out cable to 4x10G SFP+ - This cable will let you enjoy all the benefits of our new switch with the 40 Gbps ports without upgrading your while network setup. You can connect the CRS326-24S+2Q+RM to 4 other 10G SFP+ devices in a breeze, since the QSFP+ and SFP+ modules are integrated. The cable is 3 meters...
PW48V-12V85W ±48 VDC Telecom Open Frame Power Supply
In Stock
PW48V-12V85W ±48 VDC Telecom Open Frame Power Supply ±48 V DC telecom Open Frame Power supply with 12V 7A output, for use with new “r2” revision of Cloud Core Routers or the new CRS326-24S+2Q+RM, CCR1036, CCR2004, etc. Simply remove one of the current power supplies and replace with the new PW48V-12V85W for ±48 V installations. Although made...
MikroTik SFP/SFP+/SFP28 Direct Attach Cable 1m
In Stock
Cables & Adapters

MikroTik SFP/SFP+/SFP28 Direct Attach Cable 1m

MikroTik
XS+DA0001
$53.90
XS+DA0001 This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of our new CCR2004-1G-12S+2XS) for very short distances, within racks and across adjacent racks.They provide a low cost, low power and low latency interconnect solution for 25-Gigabit Ethernet, Fiber Channel and other industry standards, and are...
MikroTik SFP/SFP+/SFP28 Direct Attach Cable 3m
In Stock
Cables & Adapters

MikroTik SFP/SFP+/SFP28 Direct Attach Cable 3m

MikroTik
XS+DA0003
$67.03
XS+DA0003 This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of our new CCR2004-1G-12S+2XS) for very short distances, within racks and across adjacent racks.They provide a low cost, low power and low latency interconnect solution for 25-Gigabit Ethernet, Fiber Channel and other industry standards, and are...
MikroTik DRP-LTM - DINrail PRO mounting bracket for LtAP mini series
In Stock
$14.06
DRP-LTM DINrail PRO is a mounting bracket for LtAP mini series products, designed to fit standard35 mm × 7.5 mm DIN rails. This bracket will allow to install LtAP mini next to the industrial control equipment like water meters etc., as well as in equipment racks. Mounting bracket is made from metal and comes with a metal ring.
Mikrotik 12POW150 PW-12V150W Hot Swap power supply for CCR1072-1G-8S+
In Stock
PW48V-12V150W Mikrotik CCR1072-1G-8S+ is equipped with two redundant Hot Swap 12v 150W AC/DC power supplies - if one of them fails, the second one will take over.12POW150 Hot Swap 12v 150W AC/DC power supplies for CCR1072-1G-8S+ are now available for purchase separately. You can replace them on the go to ensure zero downtime, no need to even restart the...
MikroTik Super Low Loss RP-SMA Cable 50cm
In Stock
Cables & Adapters

MikroTik Super Low Loss RP-SMA Cable 50cm

MikroTik
flex-guide
$11.04
flex-guideflex-guide is a super low loss RP-SMA cable that delivers superior connection quality for both indoor and outdoor application. The inner conductor of the cable is silver-plated copper and both connectoes are soldered for best possible signal quality. flex-guide works with most other products with RP-SMA connectors, including most wireless...
MikroTik AC DC Power Adapter 48V 96W
*** Out of stock ATM, Available On Backorder ***
Power Management

MikroTik AC DC Power Adapter 48V 96W

MikroTik
48V2A96W
$53.96
48V2A96W - MikroTik AC DC Power Adapter 48V 96W Input: 100 ~ 240V , 50~60Hz Output: DC 48V 2A / 2000mA 96W Power Adapter with LED indicator
MikroTik Basic Pole Mount Adapter for LHG series
In Stock
Cases, Mounts & Shields

MikroTik Basic Pole Mount Adapter for LHG series

MikroTik
LHGmount
$24.75
LHGmount The LHGmount from MikroTik is a basic pole mount adapter for LHG series products. The LHGmount is made from metal and supports all Light Head Grid LHG series products including LHG XL. The package also includes (1) U-bolt and (1) K-58 mounting kit.
MikroTik quickMOUNT X for SXTsq series
In Stock
Cases, Mounts & Shields

MikroTik quickMOUNT X for SXTsq series

MikroTik
QM-X
$5.06
QM-XThe QM-X from MikroTik is an additional axis that can be used for pole mounting SXTsq series devices.
MikroTik 10 Gbps SFP+ Active Optics Direct Attach Cable
In Stock
Cables & Adapters

MikroTik 10 Gbps SFP+ Active Optics Direct Attach Cable

MikroTik
S+AO0005
$85.03
S+AO0005 S+AO005 from MikroTik is a 5m long 10 Gbps SFP+ active optics direct attach cable for connecting two SFP/SFP+ devices within and across adjacent racks. This cable is compatible with all SFP/SFP+ MikroTik products, including the RB4011 series (which is not compatible with passive direct attach cables).
MikroTik RouterBOARD Wall Mount for RB2011 series
In Stock
Cases, Mounts & Shields

MikroTik RouterBOARD Wall Mount for RB2011 series

MikroTik
WM-2011
$31.96
WM-2011The RouterBOARD Wall Mount for RB2011 Series RBWMK WM-2011 from MikroTik is a wall mount suitable for all desktop RouterBOARD 2011 models: RB2011iL-IN, RB2011LS-IN, RB2011UAS-2HnD-IN.
MikroTik quickMOUNT for Pole Mount Devices
In Stock
Cases, Mounts & Shields

MikroTik quickMOUNT for Pole Mount Devices

MikroTik
QM
$10.00
QM The quickMOUNT is a basic wall mount adapter for small point to point and sector antennas.You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT gives possibility to turn antenna within 190°.With the quickMOUNT it is possible to simultaneously mount...
MikroTik quickMOUNT pro for LHG series
In Stock
Cases, Mounts & Shields

MikroTik quickMOUNT pro for LHG series

MikroTik
QMP-LHG
$16.00
QMP-LHG You can use the quickMOUNT PRO from MikroTik with any pole mountable device with a weight less than 1.5Kg. This PRO variant is an advanced wall mount adapter for small PtP and sector antennas. You can mount it on the wall or use it as an adapter between pole diameters ensuring a reliable fit. With this unit, you can turn antenna within 140° in...
MikroTik RouterBOARD Fiber to Copper Converter
In Stock
RBFTC11 The Fiber to Cobber converter (RBFTC11) by MikroTik comes with 12-57V PoE and 802.3af/at support. Use the SFP module of your choice to match your fiber requirements and extend your copper connection. Unlike other media converters, the RBFTC11 has an outdoor waterproof and tamper-resistant case. Designed to be mounted outdoors and on towers, it...
MikroTik RouterBOARD 4-Port PCIe Gigabit Ethernet Adapter
In Stock
$143.04
RB44Ge Four port Gigabit server adapter The brand new Gigabit Ethernet card features four 10/100/1000T Gigabit Ethernet ports on a single card, giving you the opportunity to add even more ports to your router, and saving valuable PCIe slots. Bring maximum throughput and port density to your device, and with PCIe - bus speed is no longer the limit.  
MikroTik Replacement Power Supply for CCR1036
Out Of Stock
Power Management

MikroTik Replacement Power Supply for CCR1036

MikroTik
24V4APOW
$96.00
24V4APOW MikroTik Replacement Power Supply for CCR1036 The PSUCCR1036 from MikroTik is a replacement open frame power supply for all MikroTik CCR1036 models and the CCR1036-12G. Delivers 24V 4A 96W of power over 150mm figure 8 cable via 2-pin polarised female plug.
MikroTik USB Power Adapter for RouterBOARD
*** Out of stock ATM, Available On Backorder ***
Power Management

MikroTik USB Power Adapter for RouterBOARD

MikroTik
5VUSB
$5.01
5VUSB - MikroTik USB Power Adapter for RouterBOARD This injector is required to create load balancing or failover router with the USB 3G modem. Compatible models: RB493G, RB411UAHR
Showing 1-43 of 43 item(s)
Product added to wishlist
Product added to compare.

We use cookies to ensure that we give you the best experience on our website,

if you continue to use this site we will assume that you are happy with it.