Ubiquiti airMAX NanoBeam ac 5GHz 19dBi CPE w/ 2.4GHz Management

Improved Noise Immunity of NanoBeam NBE-5AC-19:

The NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.

Integrated Design of NanoBeam:

The NanoBeam models are available in two form factors:

• All-in-One Design: The Ubiquiti Research and Development team combined the radio and antenna to create a more efficient and compact CPE. The NanoBeam gets maximum gain out of the smallest footprint.
• Dish Reflector Design: Ubiquiti’s InnerFeed™ technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses.

Providing increased performance from its faster processor and innovative mechanical design at a low cost, the NanoBeam is extremely versatile and cost-effective to deploy.

NanoBeam utilizes airMAX Technology: Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller.

This “time slot” method eliminates hidden node collisions and maximizes airtime efficiency. It provides significant performance improvements in latency, throughput, and scalability compared to all other outdoor systems in its class. Intelligent QoS Priority is given to voice/video for seamless streaming.

NanoBeam means: High capacity and scalability.

Long Distance Capable of high-speed, carrier-class links. Innovative Mechanical Design:

• All-in-one design: The NanoBeam provides both the radio and antenna in the smallest possible footprint.
• Quick and easy installation: No fasteners are required for pole-mounting, and a single wall fastener (not included) is required for wall-mounting.
• Convenient alignment: The NanoBeam pivots on its ball joint for easy aiming.

Compact Form Factor of NanoBeam:

• Efficient footprint: The radio and antenna are combined into a single body that takes up minimal space.
• Versatile mounting: The NanoBeam can be mounted in almost any position needed for line of sight.
• Aesthetics: The NanoBeam is small enough to blend discreetly into the background at a customer's location

NanoBeam Features:

• Quick Installation: No fasteners are required for pole-mounting, and a single fastener (not included) is required for wall-mounting
• Convenient Alignment: The NanoBeam 5AC Gen 2 pivots on its ball joint 3-axis mount for easy aiming
• Efficient Footprint: The radio and antenna are combined into a single body that takes up minimal space. The form factor features the highest gain for its size
• Aesthetics: The NanoBeam 5AC Gen 2 is small enough to blend discreetly into the background at a customers location
• Versatile Mounting: Can be mounted in almost any position needed for line of site
• UMobile App: Integrated separate Wi-Fi radio for fast and easy setup using your mobile device

NanoBeam Specifications:

• Processor: Atheros MIPS 74Kc, 720MHz
• Memory: 128 MB DDR2, 8 MB Flashh
• (1) 10/100/1000 Ethernet Port / WiFi for Management
• RoHS Compliance: Yes
• Power Supply: 24V, 0.5A PoE
• Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return)
• Max. Power Consumption: 6W
• Operating Frequency: 5.1-5.825GHz
• Gain: 25dBi
• Max. VSWR: 2:1
• Built-In Mechanical Downtilt: +20° to -10°
• Output Power: 19 dBm
• Wind Loading: 45 lbf @ 200 km/h
• Wind Survivability: 200km/h
• LEDs: (1) Power, (1) LAN, (4) WLAN
• Signal Strength LEDs: Software-Adjustable to Correspond to Custom RSSI Levels
• Channel Sizes: 5/8/10/20/30/40/80 MHz
• Polarization: Dual Linear
• Enclosure: Outdoor UV Stabilized Plastic
• Mounting: Pole-Mount (Kit Included), Wall-Mount
• ESD/EMP Protection: Air: ±24 kV, Contact:± 24 kV
• Operating Temperature: -40 to 70° C
• Operating Humidity: 5 to 95% Non-Condensing
• Shock & Vibration: ETSI300-019-1.4

Product Includes:

• (1) airMax NanoBeam AC Gen 2
• (1) 24V PoE Gigabit  Injector
• (1) Mounting Hardware
• (1) Ball joint mount
• (1) Lock Ring
• (1) Metal strap