This industrial Gigabit Ethernet to SFP media converter with power over Ethernet is a hardened device designed for application in harsh environments. With a rugged metal case and efficient ColdDesign technology, BEXO media converters and power over Ethernet injectors are simply the best, most cost-efficient devices for industrial networking.
BEXO-G2S-60W Media Converter Key Features:
- Accepts 48-56V DC Power Input
- 65W Max POE Power @ 56VDC input
- Operating Temperature -40~75C
- DIN Rail & Wall Mount IP30 Rugged Metal Case
- (1) RJ45 10/100/1000BaseT(X) PSE POE+
- (1) 10/100/1000M SFP
![]() |
- POE Ports
- 1, 1
- Connector Type
- SFP, RJ45
- SFP Ports
- 1, 1
- Power Input
- DC
- Device Type
- Media Converter
- Device Features
- Industrial
- Power Over Ethernet
- 48V 15W 802.3af, 48V 60W 802.3at, 48V 30W 802.3at
- SFP
- Yes, 1G SFP
- Ethernet Ports
- 1, 1
IEEE Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3z 1000Base-X Gigabit Ethernet IEEE802.3af for POE IEEE802.3at for POE+ |
|
Switch Architecture |
Back-plane (Switching Fabric): 4Gbps |
|
Data Processing |
Store and Forward |
|
Flow Control |
IEEE 802.3x Flow Control and Back Pressure |
|
Jumbo Frame |
9KB |
|
Network Connector |
1 x RJ-45 10/100/1000BaseT(X) PSE with POE Output power up to 65 Watts 1 x 100/1000M SFP |
|
Network Cable |
UTP/STP Cat.5e or above Cable |
|
EIA/TIA-568 10-ohm (100m) |
||
Protocol |
CSMA/CD |
|
LED |
PWR (Green): ON-Power is detected OFF-Power is not detected SFP Lnk/Act (Green): ON-FX port is detected Flashing-FX data is transmitting/receiving RJ-45 port: Lnk/Act (Green): ON-TX port is detected Flashing-TX data is transmitting PoE (Amber): ON-PSE is activated and PD is detected Flashing-PSE is detecting PD |
|
POE Pin Assignment |
60 watts 4 pairs V-, V-, V+, V+ for pin 1, 2, 3, 6 V+, V+, V-, V- for pin 4, 5, 7, 8 |
|
DIP Switch |
DIP 1: ON-SFP speed 100M OFF-SFP speed 1000M (Default) DIP 2: Reserved |
|
Reverse polarity protection |
Present |
|
Overload current protection |
Present |
|
Power Supply |
4 pin terminal block with 48V-56V VDC Power Input, SW (Relay): Relay switch for alarm |
|
Alarm Relay Contact |
Relay outputs with current carrying capacity of 1 A @24VDC, Relay in short circuit mode when power fails. in open circuit mode when power supply is connected |
|
Power Consumption |
2 W@48 VDC Without POE |
|
POE power |
Max total power 65Watts at 56VDC |
|
Removable Terminal Block |
Provide 4 pin terminal block Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG):12-24/14-22 Stranded wire (AWG): 12-24/14-22 Torque:5lb-In/0.5Nm/0.56Nm Wire Strip length: 7-8mm |
|
Operating Temperature |
-40°C to 75°C |
|
Operating Humidity |
5% to 95% (Non-condensing) |
|
Storage Temperature |
-40°C to 85°C |
|
MTBF (mean time between failure) |
>500,000 hrs (MIL-HDBK-217F) at 25°C |
|
Housing |
Rugged Aluminum, IP30 Protection |
|
Case Dimension (L X W X D) |
103.5 x 32 x 81.5 mm (L x W x D) |
|
Installation mounting |
DIN Rail and Wall Mount options included |
|
Certifications |
|
|
Safety |
UL 60950-1 |
|
Safety |
IEC EN60950-1 |
|
EMC/EMS |
CE, FCC, EN55032/24, VCCI |
|
EN 60068-2-6 |
Vibration |
|
EN 60068-2-27 |
Shock |
|
EN 60068-2-32 |
Free Fall |