Gigabit switch 5 port TP-SW5G-NC

More Information on 5 port gigabit POE switch:

TP-SW5G-NC accepts 12V to 57VDC. 18V, 24V and 48V 150W power supplies are available. There are 2 power inputs for attachment of primary and backup power sources. It accept POE input power through port 5. Max current is 2A/port

The TP-SW5G Power Over Ethernet (POE) 10/100/1000Mb switch offered by Tycon Power Systems is a fully automatic high speed 5 port Ethernet switch with up to 45 Watts of POE power per port.

The TP-SW5G-NC is a non compliant model for devices which are not 802.3af compliant. The POE output voltage = the input voltage so it is universal in its application. The SW5 Series units supply power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). The Ethernet spec supports distances up to 100m (328 feet) between the POE switch and the remote device.

Device Pinouts

• High Power 10/100/1000Mb POE Switch
• Remotely Power Equipment through CAT5 Cable up to 100m
• Up to 45W per Port
• Automatic Speed and Duplex Sensing
• 1K Self Learning MAC Address Table
• Compact Size for Desktop
• High Temperature Operation
• Wireless Access Points, IP Cameras and Client Devices
• IP Phone and Security Camera Systems
• Power multiple devices from 1 data cable

NOTE: This switch doesn't come with power supply

User guide can be found here