TP-SCPOE-2424-HP Tycon 24V/24V PoE 60W Solar Charge Controller

TP-SCPOE-2424-HP 24V in 24V out POE/Solar Charge Control

Tycon Power Systems POE/Solar charge controllers have dual inputs to charge batteries from a POE source and also a secondary source like solar panels in order to provide redundancy and insure 100% uptime for critical applications. The solar input can handle up to 8A. The POE input up to 2.6A. They have a built in POE inserter that delivers 24V 1A at the POE out port. They also have a secondary wire terminal 24V 1.5A output. They have full electronic protections for short circuit, reverse current, overvoltage, overcharge and over discharge.

The built-in overdischarge protection and low self consumption ensures the battery is not overdischarged, which greatly increases the life of the batteries.

They have five LED indicators to give a quick visual status if current is being supplied by a POE source or solar panel, if battery is charging, If load output is turned on and a warning if battery is connected with reverse polarity.

Solar and Battery Connections are via 4 wire terminals for wire size up to 10AWG. POE Input and Output is via 2 RJ45 shielded connectors.

The controllers are externally fused with a standard replaceable fuse.

Features:

• Dual Input - Charges 24V Batteries from Solar Panel and / or Passive POE
• Supports up to 60W Total Device Load
• Regulated Output Voltage
• Compact and high temperature operation
• Low self consumption < 0.5W
• Solar Input Voltage 30V - 55Vmax @ 10A max
• POE Input Voltage 36V - 57V max @ 2.6A max

Size: 159 x 118 x 40mm
Weight: 312 g