Mikrotik 802.11a/b/g/n High Power MiniPCI card - 320mW output Atheros AR9220 chipset
High power (~320mW with RouterOS) miniPCI wireless card for special applications. RouterBOARD R52Hn miniPCI network adapter provides leading 802.11a/b/g/n performance in both 2GHz and 5GHz bands, supporting up to 300Mbps physical data rates and up to 200Mbps of actual user throughput on both the uplink and the downlink. 802.11n in your Wireless device provides higher efficiency for everyday activities such as local network file transfers, Internet browsing, and media streaming. R52Hn has a high power transmitter and superior sensitivity, bringing you even more range.
Mikrotik 802.11a/b/g/n High Power MiniPCI card - 320mW output Atheros AR9220 chipset
High power (~320mW with RouterOS) miniPCI wireless card for special applications. RouterBOARD R52Hn miniPCI network adapter provides leading 802.11a/b/g/n performance in both 2GHz and 5GHz bands, supporting up to 300Mbps physical data rates and up to 200Mbps of actual user throughput on both the uplink and the downlink. 802.11n in your Wireless device provides higher efficiency for everyday activities such as local network file transfers, Internet browsing, and media streaming. R52Hn has a high power transmitter and superior sensitivity, bringing you even more range.
Features of R52HN 802.11a/b/g/n dual band miniPCI card:
- Dual band IEEE 802.11a/b/g/n standard
- Output Power of up to 25dBm @ a/g/n Band
- Support for up to 2x2 MIMO with spatial multiplexing
- Four times the throughput of 802.11a/g
- Atheros AR9220, chipset
- High Performance (up to 300Mbps physical data rates and 200Mbps of actual user throughput) with Low Power Consumption
- Two MMCX Antenna Connectors
- Modulations: OFDM: BPSK, QPSK, 16 QAM, 64QAM DSSS: DBPSK, DQPSK, CCK
- Operating temperatures: -40ºC to +70ºC
- Idle power consumption 0.4W
- Max power consumption 7W
- MiniPCI IIIA+ design (3mm longer than MiniPCI IIIA)
- 1.5mm heatsink, 3mm RF shield thickness
- ESD Protection on RF ports
Note: In other modes than 802.11n, use J4 connector. antenna setting (a/b connector) will be ignored. HT-chain 1 must be selected (even if you use 802.11b/g)
- Device Type
- Wireless Card
- Wireless System
- 2.4GHz
5GHz