Super Flexible and Super Fast
The C6x sets a new bar for affordable speed, as well as interference reduction. With the latest in Wi-Fi 6E OFDMA technologies, and access to new 6 GHz bands (which varies by country), the C6x achieves extremely low latency speeds of up to 1.75 Gbps. The C6x can be used as a PTMP (point-to-multipoint) client radio.
Related Products & Accessories
Integrated Radio with Modular Antenna Options
The C6x’s native 8 dBi gain can be increased to 12, 16, 20, or 25 dBi using Mimosa’s modular X-series twist-on antennas, offering the ease and simplicity of integrated radios, but with so much more flexibility for short to long range deployments.
Superior Noise Mitgation
The C6x reduces in-band noise impact across the operating channel with dramatically smaller 2 MHz resource units (RU) sizes instead of legacy OFDM solutions, where any noise impacted the full channel. Thanks to Wi-Fi 6E and OFDMA, the C6x can even be used in dense, urban environments.
Take PTMP to a New Level
Achieving up to 1.75 Gbps in PTMP (point-to-multipoint) deployments, the C6x pairs together with new multi-user OFDMA scheduling and beamforming technologies on the A6 access point to enable massive subscriber scaling, advanced noise management, and access to the new, low-noise 6 GHz band.
Ultra-Rugged
The C6x is IP67 rated, which means it can withstand the harshest elements and environments. Coupled with next-gen RF noise fighting features and new low-noise 6 GHz band support, the C6x leads the way in dependable connectivity.
Performance
• Max Throughput:
1.75 Gbps IP aggregate UL/DL (2402 Mbps PHY)
• Wireless Protocols:
WiFi Interop; Auto-TDD (future release);
PTMP TDMA (future release)
• Modes:
Default mode:
PTMP client, 1.75 Gbps
Radio
• MIMO & Modulation:
2x2, PTMP MU-MIMO client support, OFDMA,
BPSK-1024QAM
• Bandwidth:
20/40/80/160 MHz channels, tunable to 5 MHz increments
• Frequency Range: PTMP: 5150–6425 MHz1 2
(restricted by country of operation)
• Max Output Power: 24 dBm
• Sensitivity (MCS 0):
-87 dBm @ 80 MHz
-90 dBm @ 40 MHz
-93 dBm @ 20 MHz
Power
• Max Power Consumption: 20 W
• System Power Method:
Passive PoE
• PoE Power Supply:
Passive POE compliant, 48–56 V
(PoE injector not included)
Physical
• Dimensions:
Height: 178mm (5”)
Width: 113mm (4.5”)
Depth: 67mm (2.6”)
• Weight: 0.7 kg (1.54 lbs)
• RF Connector Type: X-series twist-on
• Enclosure Characteristics:
Die-cast aluminum, UV stabilized paint, with outdoor UV
stable plastic radome lens
• Mounting:
Dual attached pole mount straps
• Grounding: Ground lug
Environmental
• Outdoor Ingress Protection Rating: IP67
• Operating Temperature: -40°C to +55°C (-40°F to 131°F)
• Operating Humidity: 5 to 100% condensing
• Operating Altitude: 4,420 m (14,500’) maximum
• Shock and Vibration: ETS 300-019-2-4 class 4M5
Regulatory and Compliance
• Approvals:
FCC Part 15.407; IC RSS210; CE (RED, EMCD, LVD, RoHS);
ETSI 301 893/302 502
• RoHS Compliance: Yes
• Safety: EN 62638-1
Features
• Gigabit Ethernet: 10/100/1000-BASE-T
• Management Services:
MMP support; Netconf (future support); SNMPv2c/v3; Syslog;
HTTPS; HTML 5 based Web GUI; IPv4 and IPv6
• Smart Spectrum Management:
Active scan monitors/logs ongoing RF interference across all channels (no service impact); Dynamic auto-optimization of channel and bandwidth use
• Security: AES; RADIUS; 802.1x authorization
• QoS: WiFi Interop Mode WMM;
SRS mode supports 4 user configurable QoS levels
supporting both CBWFQ and PQ
• VLAN: Q-in-Q, double tagging, management VLAN, PTMP per client VLAN
Related Products & Accessories
