MikroTik RouterBOARD mAP 2x2 2.4GHz mini WiFi Access Point w/ Passive PoE
mAP-2nd: small form factor 2GHz AP with PoE-out and POE-In
mAP-2nd is a tiny size wireless Access Point with full RouterOS capabilities. It is very portable, since it accepts power from a wide variety of sources - USB, Passive or 1 PoE (802.3af and 802.3at) and power jack.
In addition to using this device as a small and portable AP, it also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it. Main advantage apart from the size - when using with any other MT in station mode, it can work as NV2 (Mikrotik's propraietary TDMA protocol) client.
mAP-2nd: small form factor 2GHz AP with PoE-out and POE-In
mAP-2nd is a tiny size wireless Access Point with full RouterOS capabilities. It is very portable, since it accepts power from a wide variety of sources - USB, Passive or 1 PoE (802.3af and 802.3at) and power jack.
In addition to using this device as a small and portable AP, it also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it. Main advantage apart from the size - when using with any other MT in station mode, it can work as NV2 (Mikrotik's propraietary TDMA protocol) client.
Features of mAP-2n:
- dual PoE in (10-57V)
- 400Mhz MIPS Atheros
- RAM 64MB DDR2
- Built in 2GHz AP (lvl 4 RouterOS)
- microUSB for a 3G/4G modem, or for power input
- Station or AP mode wireless
- Any type PoE input 802.3af and 802.3at
- Passive PoE output (same as input voltage)
- Australian power supply
- Antenna Gain (dBi)
- 1
- Device Type
- Router
- Device Features
- PoE Powered
- Wireless System
- 2.4GHz
- Ethernet Ports
- 2 Ports 10/100
- USB slot
- microUSB type AB
- PoE in
- Active
- PoE out
- Passive