GS-4210-8P2S 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch
GS-4210-8P2S 8-Port 802.3at PoE 2 x SFP managed gigabit switch
PLANET GS-4210-8P2S is a cost-optimized, 1U, Gigabit IEEE 802.3at PoE+ Managed Switch featuring PLANET intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 8 10/100/1000BASE-T ports featuring 30watt 802.3at PoE+ and 2 100/1000BASE-X SFP ports. With a total power budget of up to 120 watts for different kinds of PoE applications, the GS-4210-8P2S provides a quick, safe and cost-effective 802.3at PoE++ network solution for small businesses and enterprises. Rack mountable !
features:
- 240-watt/125-watt PoE budget/Remote PoE Power Control
- PD Alive Check/scheduled power Reciclyng/Time-based PoE Schedule
- IEEE 802.1Q VLAN/Voice VLAN/Private VLAN/Q-IN-Q
- IGMP snooping v2 and v3/MLD snooping
- IPv6 Web interface/SNMP v1,v2c and v3/ SSH/SSL management
- 13-inch desktop size,19-inch Rack-mountable
GS-4210-8P2S 8-Port 802.3at PoE 2 x SFP managed gigabit switch
Physical Ports in GS-4210-8P2S:
- 8-port 10/100/1000BASE-T RJ45 copper with PoE injector function
- 2 100/1000BASE-X mini-GBIC/SFP slots
- RJ45 console interface for switch basic management and setup
Power over Ethernet
- Complies with IEEE 802.3at PoE+ and 802.3af standard PSE
- Backward compatible with IEEE 802.3af Power over Ethernet
- Selectable PoE mode: End-span/Mid-span/802.3bt/UPoE/Legacy
- Each PoE port supports 54V DC power to powered device
- 120-watt PoE budget
- Auto detects powered device
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100 meters in standard mode and 250m in extended mode
- PoE management
- Total PoE power budget control
- Per port PoE function enable/disable
- PoE port power feeding priority
- Per PoE port power limitation
- PD classification detection
- PoE extension
- Intelligent PoE features
- PD alive check
- PoE schedule
- Scheduled power recycling
Layer 2 Features
- Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
- High performance Store and Forward architecture, broadcast storm control, and runt/CRC filtering that eliminates erroneous packets to optimize the network bandwidth
- Supports VLAN
- IEEE 802.1Q tagged VLAN
- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- Protocol VLAN
- Voice VLAN
- Private VLAN
- Management VLAN
- GVRP
- Supports Spanning Tree Protocol
- STP (Spanning Tree Protocol)
- RSTP (Rapid Spanning Tree Protocol)
- MSTP (Multiple Spanning Tree Protocol)
- STP BPDU Guard, BPDU filtering and BPDU forwarding
- Supports Link Aggregation
- IEEE 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Provides port mirror (many-to-1)
- Loop protection to avoid broadcast loops
Quality of Service
- Ingress and egress rate limit per port bandwidth control
- Storm control support
- Broadcast/Unknown unicast/Unknown multicast
- Traffic classification
- IEEE 802.1p CoS
- TOS/DSCP/IP precedence of IPv4/IPv6 packets
- Strict priority and Weighted Round Robin (WRR) CoS policies
Multicast
- Supports IPv4 IGMP snooping v2 and v3
- Supports IPv6 MLD snooping v1, v2
- IGMP querier mode support
- IGMP snooping port filtering
- MLD snooping port filtering
Security
- Authentication
- IEEE 802.1X port-based network access authentication
- Built-in RADIUS client to cooperate with the RADIUS servers
- RADIUS/TACACS+ login user access authentication
- Access control list
- IPv4/IPv6 IP-based ACL
- MAC-based ACL
- MAC security
- Static MAC
- MAC filtering
- Port security for source MAC address entries filtering
- DHCP snooping to filter distrusted DHCP messages
- Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
- IP source guard prevents IP spoofing attacks
- DoS attack prevention
- SSH/SSL
Management
- IPv4 and IPv6 dual stack management
- Switch management interface
- Web switch management
- Telnet command line interface
- SNMP v1 and v2c switch monitoring
- SSHv2 and TLSv1.2 and SNMP v3 secure access
- SNMP Management
- Four RMON groups (history, statistics, alarms and events)
- SNMP trap for interface link up and link down notification
- User privilege levels control
- Built-in Trivial File Transfer Protocol (TFTP) client
- BOOTP and DHCP for IP address assignment
- System maintenance
- Firmware upload/download via HTTP/TFTP
- Configuration upload/download through web interface
- Dual images
- Hardware reset button for system reboot or reset to factory default
- SNTP Network Time Protocol
- Network Diagnostic
- SFP-DDM (digital diagnostic monitor)
- Cable diagnostics
- ICMPv4/ICMPv6 remote ping
- Link Layer Discovery Protocol (LLDP) and LLDP-MED
- Event message logging to remote Syslog server
- PLANET smart discovery utility
- Smart fan with speed control
- Device Type
- Network Switch
- POE Ports
- 8
- SFP Ports
- 2 Ports
- Power Input
- AC
- SFP
- Yes, 1G SFP
- Ports
- 8 10/100/1000TX + 2 100/1000X SFP
- Type
- Managed
- PoE Standard
- 802.3af/at
- Power Consumption
- 170W/ 580BTU
- Operating Temperature
- 0 to 50°C
- Throughput
- 14.88Mpps@64Bytes
- Supports
- Cloudviewer App (more info. below)
- PoE Budget
- 140W@25ºC, 120W@50°C