IgniteNet GLinq 12-54V DC IN Outdoor GigE to Coax Bridge with WiFi

GLinq Features:

• Up to 2Gbps PHY rate
• Supports all G.hn baseband bandplans 25, 50, 100, 200MHz
• LDPC forward error correction provides enhanced FEC over all wire media
• Automated PHY block level error detection and retransmission
• Enhanced selective repeat ARQ based ACK for improved integrity in noisy channels
• Robust communication Mode for high noise environments
• 128-bit AES CCMP encryption
• Hardware packet inspection for IPv4 IGMP snooping and IPv6 MLD
• Hardware based Bandwidth limitation
• 8 levels of packet prioritized QoS

Technical Specifications:

• Available Interfaces
    1000 Base-T Ethernet
    G.hn 2 Gbps coax PHY with F-type female connector
• Wi-Fi Features
Supports Service Provider and Enterprise type networks
    Stand-alone or Cloud-controlled operating modes
    Bridged AP WDS mode
    802.11b/g/n, 2x2 (2.4GHz)
    Supports up to 8 SSIDs per radio
    IEEE 802.11e Wi-Fi Multimedia (WMM-QoS)
    WPA,WPA2-PSK,WPA2-AES, PSK and Enterprise
    Admission control by client MAC address
• RF Performance (TX): 2.4GHz: 25dBm @ 6Mbps, 18dBm @ 300Mbps
• RF Performance (RX): 2.4 GHz: -90 dBm @ 6Mbps, -72 dBm @ 300Mbps 
• Antenna Outdoor 2.4GHz: 2dBi omni-directional
• LEDS: Power, WiFi, Ethernet, G.hn
• Mechanical: Outdoor
    Weather rating IP-55
    Temperature rating -40 to 70 C°/ -40 to 158 F
    Store temperature -40 to 70 C°/ -40 to 158 F
    Mounting options Wall or pole (25 – 100 mm/ 0.98 to 3.94 inch)
• Dimensions: Outdoor: 185 x 119 x 44 mm/ 7.28 x 4.69 x 1.73 inch)
• Weight: Outdoor: 490 g (1.08 lb)
• Power
    Operation voltage 12 – 54 V
    Power consumption 6.5 W max
    DC jack (central pin 2.0 mm, diameter 5.5 mm)
    Screw terminal block (5 mm pin spacing) (outdoor model only)
    Power through coaxial cable optional
    Max current 2.5A on coaxial power system