Accessories

MikroTik Replacement Power Supply for CCR1036
Out Of Stock
Power Management

MikroTik Replacement Power Supply for CCR1036

MikroTik
24V4APOW
$96.00
24V4APOW MikroTik Replacement Power Supply for CCR1036 The PSUCCR1036 from MikroTik is a replacement open frame power supply for all MikroTik CCR1036 models and the CCR1036-12G. Delivers 24V 4A 96W of power over 150mm figure 8 cable via 2-pin polarised female plug.
View
MikroTik RouterBOARD 4-Port PCIe Gigabit Ethernet Adapter
In Stock
Cables & Adapters

MikroTik RouterBOARD 4-Port PCIe Gigabit Ethernet Adapter

MikroTik
RB44Ge
$140.00
RB44Ge Four port Gigabit server adapter The brand new Gigabit Ethernet card features four 10/100/1000T Gigabit Ethernet ports on a single card, giving you the opportunity to add even more ports to your router, and saving valuable PCIe slots. Bring maximum throughput and port density to your device, and with PCIe - bus speed is no longer the limit.  
MikroTik RouterBOARD Aluminium Indoor Case for RBM11G, RB411, RB911, RB912, RB922 series
*** Out of stock ATM, Available On Backorder ***
Cases, Mounts & Shields

MikroTik RouterBOARD Aluminium Indoor Case for RBM11G, RB411, RB911, RB912, RB922 series

MikroTik
CA411-711
$25.26
CA/411 711 Universal case for RB411 or 711 or 911 or 912 Indoor CA411 711 contains one hole for N female Bulkhead connector or AC/SWI Swivel antenna.Suits RB411/RB711/911/912 but please advise which board you are intending to use with it (there is slight diffrence between them)
MikroTik RouterBOARD Aluminium Indoor Case for RBM33G & RB433 series
In Stock
Cases, Mounts & Shields

MikroTik RouterBOARD Aluminium Indoor Case for RBM33G & RB433 series

MikroTik
CA433U
$37.46
CA433U case for RB433 series and RBM33G Indoor case (3 holes for Nfemale Bulkhead connectors or Swivel antennas and hole for USB). This new revision is slightly higher, to fit more miniPCI card models. Ships with different faceplate stickers, to match used ports. Fits RB433 series products and RBM33G
MikroTik RouterBOARD Wall Mount for RB2011 series
*** Out of stock ATM, Available On Backorder ***
Cases, Mounts & Shields

MikroTik RouterBOARD Wall Mount for RB2011 series

MikroTik
WM-2011
$31.96
WM-2011The RouterBOARD Wall Mount for RB2011 Series RBWMK WM-2011 from MikroTik is a wall mount suitable for all desktop RouterBOARD 2011 models: RB2011iL-IN, RB2011LS-IN, RB2011UAS-2HnD-IN.
MikroTik SFP/SFP+/SFP28 Direct Attach Cable 1m
In Stock
Cables & Adapters

MikroTik SFP/SFP+/SFP28 Direct Attach Cable 1m

MikroTik
XS+DA0001
$49.50
XS+DA0001 This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of our new CCR2004-1G-12S+2XS) for very short distances, within racks and across adjacent racks.They provide a low cost, low power and low latency interconnect solution for 25-Gigabit Ethernet, Fiber Channel and other industry standards, and are...
MikroTik SFP/SFP+/SFP28 Direct Attach Cable 3m
In Stock
Cables & Adapters

MikroTik SFP/SFP+/SFP28 Direct Attach Cable 3m

MikroTik
XS+DA0003
$68.32
XS+DA0003 This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of our new CCR2004-1G-12S+2XS) for very short distances, within racks and across adjacent racks.They provide a low cost, low power and low latency interconnect solution for 25-Gigabit Ethernet, Fiber Channel and other industry standards, and are...
MikroTik Super Low Loss RP-SMA Cable 50cm
In Stock
Cables & Adapters

MikroTik Super Low Loss RP-SMA Cable 50cm

MikroTik
flex-guide
$15.40
flex-guideflex-guide is a super low loss RP-SMA cable that delivers superior connection quality for both indoor and outdoor application. The inner conductor of the cable is silver-plated copper and both connectoes are soldered for best possible signal quality. flex-guide works with most other products with RP-SMA connectors, including most wireless...
MikroTik SXTsq-mount | Buy MikroTik SXTsq Mount | WISP Australia
In Stock
Accessories

MikroTik SXTsq-mount SXTsq Mount

MikroTik
SXTsq-mount
$15.92
SXTsq-mount A simple, durable alignment attachment for the SXTsq series products. Attach it to the back of the SXTsq using a Ph1 screwdriver, mount everything on a pole using the provided U bolt and an 8 mm ratchet, then place the bolt in one of the three positions - these enable fine adjustments up to 45 degrees in both directions!
Showing 193-204 of 439 item(s)
Accessories

Brand

Connector Type

Price

$0.00 - $2,910.00
Accessories
Product added to wishlist
Product added to compare.

We use cookies to ensure that we give you the best experience on our website,

if you continue to use this site we will assume that you are happy with it.