D8080 Industrial 8-Port Gigabit Ethernet Switch

    D8080 Industrial 8-Port Gigabit Ethernet Switch

    Last items in stock
    Tax included

    The DY-D8080 from Dymec is an unmanaged, industrial gigabit Ethernet switch in an IP30 rated enclosure. The DY-D8080 is designed for the integration of mission-critical network devices and features (8) Ethernet ports.

    QuantityPriceYou Save
    10A$132.20Up to A$90.00
    IEEE StandardsIEEE 802.3, IEEE 802.3ab, 
    IEEE 802.3u, IEEE 802.3z
    IEEE 802.3x,
    Back Plane10 Gbps, Non-blocking Switching Fabric
    Operating Temperature-40° ~ 85° C
    Storage Temperature-40° ~ 85° C
    Humidity5% ~ 97% non-condensing
    DimensionsIP-30, Military Grade, 103. x 32 x 81.5 mm (L x W x  D)
    EMIFCC Class A, CE-EN6100-4-2/3/4/5/6/8/11/12, CE-EN6100-6-2/4
    SafetyUL/cUL Class I, Division 2
    ShockIEC 60068-2-27 / EN 50155
    Free FallIEC 60068-2-32 / EN 50155
    VibrationIEC 60068-2-6 / EN 50155
    Ethernet Ports8 x 10/1001000TX RJ-45 
    Mac Address Table2 K MAC Address Table
    WarrantyLimited Lifetime
    Buffer1 M
    MethodStore and Forward
    Removable Terminal Block

    Provide 2 Redundant power , Alarm relay contact ,6
    Wire range: 0.34 mm^2 to 2.5 mm^2
    Solid wire (AWG):12-­‐‑24/14-­‐‑22
    Stranded wire(AWG): 12-­‐‑24/14-­‐‑22
    Torque: 5 lb-­‐‑In / 0.5 Nm / 0.56 Nm
    Wire Strip length: 7-­‐‑8 mm

    Transfer Rate

    14,880 PPS for Ethernet Port
    148,800 PPS for Fast Ethernet Port                                                                     1,488,000 PPS for Gigabit Port

    Power Input9 ~ 56 Volts DC, Dual Inputs,  Surge Protected                                                   18 ~ 36 Volts AC, Dual Inputs,  Surge Protected 
    Fault OutputN/A
    Power Consumption2.76 Watts @ 48 Volts DC at Full Load
    Power RedundancyYes  - Dual Input, Surge Protected


    MTBF - Mean Time Between Failure510,507 Hours
    MIL-HDBK-217F @ 25 Degrees Centigrade
    Class 1 Division 2, Military Grade
    HousingMilitary Grade, IP 30
    ULClass 1 Division 2, Hazardous Locations (HazLoc)
    Network Connector

    8 x RJ-45 10/100/1000BaseT(X) Auto negotiation,
    Auto MDI/MDI-­X function, Full/Half duplex


    PW 1 (Power 1) Green,
    PW 2 (Power 2) Green,
    TX / RJ-­‐‑45 port:
    LNK (Link/Active) Green,
    SPD (Speed) 10/100 (yellow) ,1000 (Green)

    Reserve Polarity ProtectionYes
    Overload Current ProtectionYes
    Alarm Relay ContactN/A
    SafetyIEC 60950-1
    EN50121-4Railway Applications / Electromagnetic Compatibility
    EN50121-3-2Railway Applications / Electromagnetic Compatibility
    EN55011Industrial Scientific and Medical (ISM) Equipment
    EN50155Railway Applications - Electronic Equipment
    EN55022 / 24ITE Equipment
    Installation / MountingDin-Rail / Shelf Mount (Din-Rail Brackets Included)
    Size TypeSmall Form Factor
    Removable Terminal Block6 Pin - 2 Redundant Power / 1 Alarm Relay Contact
    Removable Terminal BlockProvide 2 Redundant power, 4 Pin
    Wire range: 0.34 mm^2 to 2.5 mm^2
    Solid wire (AWG):12-­‐‑24/14-­‐‑22
    Stranded wire(AWG): 12-­‐‑24/14-­‐‑22
    Torque: 5 lb-­‐‑In/0.5 Nm / 0.56 Nm
    Wire Strip length: 7-­‐‑8 mm
    American Certified EthernetYes
    American Design & EngineeringYes
    NEC Code / HazLocNEC500, NEC505 / IEC 60079-10
    Port Speeds / Temperature HardenedFull Line Rate - Non-blocking / Yes
    Device Type
    Network Switch
    Device Features
    Industrial, Unmanaged
    No reviews
    Product added to wishlist
    Product added to compare.

    We use cookies to ensure that we give you the best experience on our website,

    if you continue to use this site we will assume that you are happy with it.